@gristlabs/sqlite3

中文文档
6.0.1-grist.1发布于 2026/06/12BSD-3-ClauseTypeScriptCommonJS近 30 天下载 9960

Asynchronous, non-blocking SQLite3 bindings

原始使用文档
文档目录9 节
  1. Prebuilt binaries
  2. Other ways to install
  3. Source install
  4. Custom file header (magic)
  5. Building for node-webkit
  6. Building for SQLCipher
  7. On OS X with Homebrew
  8. On most Linuxes (including Raspberry Pi)
  9. Custom builds and Electron

:no_entry: [DEPRECATED] node-sqlite3

Note: This repository is currently unmaintained. We will not update any of its issues or pull requests.


Asynchronous, non-blocking SQLite3 bindings for Node.js.

Latest release Build Status FOSSA Status N-API v3 Badge N-API v6 Badge

Features

Installing

You can use npm or yarn to install sqlite3:

  • (recommended) Latest published package:
npm install sqlite3
# or
yarn add sqlite3
  • GitHub's master branch: npm install https://github.com/tryghost/node-sqlite3/tarball/master

Prebuilt binaries

sqlite3 v5+ was rewritten to use Node-API so prebuilt binaries do not need to be built for specific Node versions. sqlite3 currently builds for both Node-API v3 and v6. Check the Node-API version matrix to ensure your Node version supports one of these. The prebuilt binaries should be supported on Node v20.17.0+.

The module uses prebuild-install to download the prebuilt binary for your platform, if it exists. These binaries are hosted on GitHub Releases for sqlite3 versions above 5.0.2, and they are hosted on S3 otherwise. The following targets are currently provided:

  • darwin-arm64
  • darwin-x64
  • linux-arm64
  • linux-x64
  • linuxmusl-arm64
  • linuxmusl-x64
  • win32-x64

Unfortunately, prebuild cannot differentiate between armv6 and armv7, and instead uses arm as the {arch}. Until that is fixed, you will still need to install sqlite3 from source.

Support for other platforms and architectures may be added in the future if CI supports building on them.

If your environment isn't supported, it'll use node-gyp to build SQLite, but you will need to install a C++ compiler and linker.

Other ways to install

It is also possible to make your own build of sqlite3 from its source instead of its npm package (See below.).

The sqlite3 module also works with node-webkit if node-webkit contains a supported version of Node.js engine. (See below.)

SQLite's SQLCipher extension is also supported. (See below.)

API

See the API documentation in the wiki.

Usage

Note: the module must be installed before use.

const sqlite3 = require('sqlite3').verbose();
const db = new sqlite3.Database(':memory:');

db.serialize(() => {
    db.run("CREATE TABLE lorem (info TEXT)");

    const stmt = db.prepare("INSERT INTO lorem VALUES (?)");
    for (let i = 0; i < 10; i++) {
        stmt.run("Ipsum " + i);
    }
    stmt.finalize();

    db.each("SELECT rowid AS id, info FROM lorem", (err, row) => {
        console.log(row.id + ": " + row.info);
    });
});

db.close();

Source install

To skip searching for pre-compiled binaries, and force a build from source, use

npm install --build-from-source

The sqlite3 module depends only on libsqlite3. However, by default, an internal/bundled copy of sqlite will be built and statically linked, so an externally installed sqlite3 is not required.

If you wish to install against an external sqlite then you need to pass the --sqlite argument to npm wrapper:

npm install --build-from-source --sqlite=/usr/local

If building against an external sqlite3 make sure to have the development headers available. Mac OS X ships with these by default. If you don't have them installed, install the -dev package with your package manager, e.g. apt-get install libsqlite3-dev for Debian/Ubuntu. Make sure that you have at least libsqlite3 >= 3.6.

Note, if building against homebrew-installed sqlite on OS X you can do:

npm install --build-from-source --sqlite=/usr/local/opt/sqlite/

Custom file header (magic)

The default sqlite file header is "SQLite format 3". You can specify a different magic, though this will make standard tools and libraries unable to work with your files.

npm install --build-from-source --sqlite_magic="MyCustomMagic15"

Note that the magic must be exactly 15 characters long (16 bytes including null terminator).

Building for node-webkit

Because of ABI differences, sqlite3 must be built in a custom to be used with node-webkit.

To build sqlite3 for node-webkit:

  1. Install nw-gyp globally: npm install nw-gyp -g (unless already installed)

  2. Build the module with the custom flags of --runtime, --target_arch, and --target:

NODE_WEBKIT_VERSION="0.8.6" # see latest version at https://github.com/rogerwang/node-webkit#downloads
npm install sqlite3 --build-from-source --runtime=node-webkit --target_arch=ia32 --target=$(NODE_WEBKIT_VERSION)

You can also run this command from within a sqlite3 checkout:

npm install --build-from-source --runtime=node-webkit --target_arch=ia32 --target=$(NODE_WEBKIT_VERSION)

Remember the following:

  • You must provide the right --target_arch flag. ia32 is needed to target 32bit node-webkit builds, while x64 will target 64bit node-webkit builds (if available for your platform).

  • After the sqlite3 package is built for node-webkit it cannot run in the vanilla Node.js (and vice versa).

    • For example, npm test of the node-webkit's package would fail.

Visit the “Using Node modules” article in the node-webkit's wiki for more details.

Building for SQLCipher

For instructions on building SQLCipher, see Building SQLCipher for Node.js. Alternatively, you can install it with your local package manager.

To run against SQLCipher, you need to compile sqlite3 from source by passing build options like:

npm install sqlite3 --build-from-source --sqlite_libname=sqlcipher --sqlite=/usr/

node -e 'require("sqlite3")'

If your SQLCipher is installed in a custom location (if you compiled and installed it yourself), you'll need to set some environment variables:

On OS X with Homebrew

Set the location where brew installed it:

export LDFLAGS="-L`brew --prefix`/opt/sqlcipher/lib"
export CPPFLAGS="-I`brew --prefix`/opt/sqlcipher/include/sqlcipher"
npm install sqlite3 --build-from-source --sqlite_libname=sqlcipher --sqlite=`brew --prefix`

node -e 'require("sqlite3")'

On most Linuxes (including Raspberry Pi)

Set the location where make installed it:

export LDFLAGS="-L/usr/local/lib"
export CPPFLAGS="-I/usr/local/include -I/usr/local/include/sqlcipher"
export CXXFLAGS="$CPPFLAGS"
npm install sqlite3 --build-from-source --sqlite_libname=sqlcipher --sqlite=/usr/local --verbose

node -e 'require("sqlite3")'

Custom builds and Electron

Running sqlite3 through electron-rebuild does not preserve the SQLCipher extension, so some additional flags are needed to make this build Electron compatible. Your npm install sqlite3 --build-from-source command needs these additional flags (be sure to replace the target version with the current Electron version you are working with):

--runtime=electron --target=18.2.1 --dist-url=https://electronjs.org/headers

In the case of MacOS with Homebrew, the command should look like the following:

npm install sqlite3 --build-from-source --sqlite_libname=sqlcipher --sqlite=`brew --prefix` --runtime=electron --target=18.2.1 --dist-url=https://electronjs.org/headers

Testing

npm test

Contributors

Acknowledgments

Thanks to Orlando Vazquez, Eric Fredricksen and Ryan Dahl for their SQLite bindings for node, and to mraleph on Freenode's #v8 for answering questions.

This module was originally created by Mapbox & is now maintained by Ghost.

Changelog

We use GitHub releases for notes on the latest versions. See CHANGELOG.md in git history for details on older versions.

Copyright & license

Copyright (c) 2013-2026 Mapbox & Ghost Foundation

node-sqlite3 is BSD licensed.

FOSSA Status

版本与发布记录

@gristlabs/sqlite3 共发布 13 个版本,首次发布于 2019/07/03;过去 12 个月发布了 3 个版本。

版本发布日期距今
6.0.1-grist.1latest2026/06/125 个月前
5.1.4-grist.122026/03/178 个月前
5.1.4-grist.112026/03/178 个月前
5.1.4-grist.82023/02/153 年前
5.1.4-grist.72023/02/023 年前
4.1.1-grist.62022/03/104 年前

关于 @gristlabs/sqlite3 的常见问题

@gristlabs/sqlite3 是什么?

Asynchronous, non-blocking SQLite3 bindings

如何安装 @gristlabs/sqlite3?

在项目目录运行 npm install @gristlabs/sqlite3,或使用 pnpm add / yarn add / bun add。

@gristlabs/sqlite3 支持 TypeScript 吗?

支持。包内自带 TypeScript 类型声明(package.json 声明了 types 入口),安装后即可获得类型提示,无需再安装 @types 包。

@gristlabs/sqlite3 支持 ESM 还是 CommonJS?

以 CommonJS 形式发布,可以直接 require();在 ES Module 项目中也可以用 import 引入(Node.js 会把 module.exports 作为默认导出)。

@gristlabs/sqlite3 需要什么版本的 Node.js?

package.json 的 engines 字段要求 Node.js >=20.17.0。版本不符时 npm 默认只给出警告,开启 engine-strict 后会拒绝安装。

@gristlabs/sqlite3 可以商用吗?

@gristlabs/sqlite3 使用 BSD-3-Clause 许可。宽松许可:允许商业使用、修改和再分发,通常只需在分发时保留原版权与许可声明。另外不得用原作者名义为衍生产品背书。以上为概括,不构成法律意见,请以许可原文为准。

@gristlabs/sqlite3 的下载量有多少?

根据 npm 官方下载统计,@gristlabs/sqlite3 在 2026/10/17 – 2026/11/15 这 30 天内被下载 9,960 次,日均约 332 次。下载量会把 CI 构建、镜像同步和作为其他包依赖的安装一并计入,适合横向比较热度,不能直接等同于使用人数。

@gristlabs/sqlite3 还在维护吗?

最新版本 6.0.1-grist.1 发布于 2026/06/12(5 个月前);至今共发布 13 个版本,其中过去 12 个月发布了 3 个;首次发布于 2019/07/03。发布频率只是参考信号:功能稳定的工具可能很少需要更新,建议结合源码仓库的 issue 和提交记录判断。